Posted by Amthal on
Fire Suppression & Detection Systems For Data Centres
If your company utilises a data centre for its normal operations, then you’re likely well aware of the importance of keeping this type of facility secure. Security risks can come from both the physical and the virtual worlds, and perhaps one of the most threatening ones is the possibility of a fire breaking out.
Any considerate business owner would want to combat this threat, and the most effective way to do so is with a fire suppression system that is up for the task. If you want to learn more about this, keep reading to find out everything you need to know about protecting your data centre from potential fires.
What fire suppression system is most suitable for a data canter?
Let’s first go over what kind of fire protection you need exactly.
In a data centre, fires can occur almost anywhere. It can start in the electronic equipment itself, in the connections (wires and cables) between them, or in separate locations that are not connected to the data network at all.
What this means is that different kinds of fire protection will be needed for different areas of the data centre. For example, the area that houses the servers will need what’s called a clean-agent fire suppression system. This is a type of system that uses gas to extinguish flames, allowing fires to be safely put out without damaging electrical components.
For the other areas, traditional sprinkler systems that use water can be used. These are highly effective and are much less costly to install.
Important Considerations When Choosing a System
Next, we’ll go over what you have to take into account when installing a fire suppression system for your data centre.
In terms of detection, most systems typically work by scanning for the presence of smoke and sudden spikes in ambient temperatures. You will need several of these scattered around strategically, as like we said earlier, fires can occur anywhere in a data centre.
You must also be considerate of the physical layout of your data facility. Sprinkler systems can wreak havoc on the equipment and property below them, which means you have to be careful about where your data servers are located in relation to these types of fire suppression.
You also want to be mindful of the ventilation around the electronic hardware. These devices are usually provided with plenty of flowing air. This helps prevent the components from overheating, but it also serves to complicate any fire that may occur. The increased flow of oxygen to these areas means that any flames that start can rapidly spread and become difficult to control.
In summary, the mere fact that you have a data centre means that fire protection solutions should be a top priority for your company. Not only that, but you must also be careful in selecting the right ones for each area of your facility. After all, you want to do your due diligence in ensuring that your data is kept safe and well-protected.
If you need more specific advice, feel free to send us a message. We provide fire protection services in London and we’ll be more than happy to help. Get in touch with us by phone or using the form below and we’d love to discuss your requirements.